- Stainless Steel Racks
- Brackets Cut Sheet
- Dip Tubes
- Warewash Units Parts List
- Laundry Units Parts List
- Drain/Deodorizing Parts List
- Viking Bowl Spray Nozzles
- Brass Injection Fittings
- Check Valves
- Detergent Probes
- Dish Tank Fittings
- Plastic Injection Fittings
- Saddle Brackets/Self Tapping Valve
- Straight Plastic Injection Fittings
Viking Bowl
Effective powder and solid product dispensing. Used with 2000 CC and 4000 CC jugs (6 inch diameter). Comes with vacuum breaker and complete hardware.
Stainless Steel Racks
Durable, 304 SS construction. Easy installation. Quantity discounts available.
Screen Caps
Used for powder detergent dispensing through standard 6-inch jug with
100 mm neck finish. Two different mesh sizes available, .030 (N style) and .055 (B style). Available in threaded style or locking style; the locking style prevents accidental removal by the end user.
Barrier Paper
Installed under the screen cap for added safety in handling. The paper prevents powder from sifting through the cap until the jug is in place and ready for use, then the barrier paper dissolves instantly with water.
Pot/Pan Mechanical Timer Valve
Adjustable on time of up to one minute. Cost-effective, mechanically timed, and now with an internal filter. Used in conjunction with a Viking Bowl.
DR-100
Economical overflow reservoir for dispensing bulk powder detergent. Comes with complete installation hardware.
Probes
UP-2 Stud Probe
UP-2 Stud “flip” Probe (Studs are Installed Upside Down for tight corners)
UP-200 Probe with removable SS Tips
UP-200 Probe with removable Carbon Tips
UP-100 Bayonet Probe
Dish Machine Top Mount Bracket
Have an “island” dish machine installation coming up? This is what you’ll need. The bracket is heavy 16-gauge stainless steel. Mount any Pro Unit to the bracket and put a Viking Bowl on the opposite side! Or mount a Chem$aver on the front and Viking Bowl on the back.
Bowl / Timer Bracket
Turn the eight holes typically required for mounting a Viking Bowl and Mechanical Timer into just four. The stainless steel bracket holds the timer and utilizes the two mounting holes on the left side of the Viking Bowl to secure the bracket to the wall.